Using the Phone Features
User’s Guide
4–3
3. Press the SIM tray (with the SIM card inserted) down
4
into
the SIM slot and lock it into place
5
by sliding the tray to the
left.
NOTE:
Repeat the same steps to remove the SIM card from the
SIM tray.
Activating Your Phone Service
Before you are able to use the phone feature on your Pocket PC,
you will need to subscribe with a mobile phone service provider.
NOTE:
If you have purchased a prepaid SIM card to use with your
iPAQ Pocket PC, the following information is not applicable.
You can place a phone call to the service provider to activate your
mobile phone service. Your carrier may require the following
information to activate your card:
❏
SIM Card Serial Number (printed on the box label or on
the back of the SIM card)
❏
IMEI Number (printed on the system label under the
removable battery)
Your mobile phone service representative will give you your
wireless phone number and walk you through setting up your
service.
Phone Features
The following features are supported on your iPAQ Pocket PC;
however, these features must be activated by your mobile phone
service provider:
❏
Call Forwarding
❏
CSD—Circuit Switched Data
❏
GPRS—General Packet Radio Service
