Using Wi-Fi
User’s Guide
8–11
Changing TCP/IP Settings
Note:
Most Internet Service Providers (ISPs) and private
networks now use dynamically-assigned IP addresses. You will
not need to change the Transmission Control Protocol/Internet
Protocol (TCP/IP) settings unless your ISP or private network
does not use dynamically-assigned IP addresses. If you are not
sure if your ISP or private network use dynamically-assigned IP
addresses, check with your network administrator.
To change TCP/IP Settings:
1. Contact your ISP or network administrator to determine your
IP address, subnet mask, and/or default gateway (if needed).
2. Be sure Wi-Fi is on.
3. From the
iPAQ Wireless
screen, tap >
Settings
>
Network
Adapters
tab.
4. In the
My network card connects to...
listbox, tap either
The Internet
or
Work.
Note:
If you are connecting to your ISP at home, tap
The
Internet.
If you are connecting to a private network, such as a
corporate network at work, tap
Work.
5. In the
Tap an adapter to modify settings
box, tap
HP iPAQ
Wi-Fi Adapter.
6. Tap the
IP Address
tab.
7. Tap
Use specific IP address
and enter the requested
information.
8. Tap
OK
to save your settings.
Summary of Contents for iPAQ rx3000 series
Page 13: ...Contents User s Guide xiii ...
