120
Chapter 5
Boot Console Handler
Displaying the Current Memory Configuration
Displaying the Current Memory Configuration
The following sample screen output uses the
memory
command to show a memory
configuration table with properly-installed and configured memory.
To display the current memory configuration for a workstation, first follow the directions
in the section “Accessing the Boot Console Handler” found in this chapter. Once you are in
the Boot Console Handler’s Main Menu, type the following:
Main Menu: Enter command > information [Enter]
This places you in the Information Menu. From here, type the following:
Information Menu: Enter command > memory [Enter]
The screen displays status and configuration information for the memory DIMMs installed
in the workstation. The following sample shows the memory information when memory
DIMMs are properly installed and configured.
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot Size (A) Status (A) Size (B) Status (B)
---- ------ ------------- -------- ----------
0a/0b
512MB Active 512MB Active
1a/1b 512MB Active 512MB Active
2a/2b 512MB Active 512MB Active
3a/3b 512MB Active 512MB Active
4a/4b
512MB Active 512MB Active
5a/5b 512MB Active 512MB Active
6a/6b 512MB Active 512MB Active
7a/7b 512MB Active 512MB Active
TOTAL MEMORY = 8192MB
MEMORY FAULT TABLE
Slot Size Status
---- ------ -------------
Summary of Contents for j6700
