manualshive.com logo in svg

HP jetdirect 250m, User Manual

The HP Jetdirect 250m User Manual is your comprehensive guide to effectively using this innovative networking device. Download the manual for free from our website and access vital information on setup, troubleshooting, and advanced features. Maximize your product experience with our user-friendly manual available at 88.208.23.73:8080.

Share
Download
background image

17 UNABLE TO 
FIND SERVER

(Ethernet) The HP Jetdirect print server was unable to find the NetWare print server 
(Remote Printer mode) or file server (Queue Server mode). (There was no response to 
service queries for advertising print servers or file servers that matched the configured 
print server or file server name.) 
Make sure that the print server or file server is running and that the print server or file 
server name configured on the HP Jetdirect print server matches the actual name used by 
the print server or file server. Also make sure that all cables and routers are functioning 
correctly. 

18 PASSWORD 
ERROR

The HP Jetdirect print server detected that the password for the NetWare print server 
object is wrong. Use a NetWare utility (such as PCONSOLE) to erase the password for the 
print server object. When the HP Jetdirect print server logs on again, it sets a new 
password. 
Note: When multiple file servers are configured, the error is only displayed on the 
configuration page if none of the file servers are connected. 

19 NO QUEUE 
ASSIGNED

The HP Jetdirect print server detected that the print server object has not been assigned 
any queues to service. Assign queues to the print server object using printer installation or 
NetWare utilities. 
Note: When multiple file servers are configured, the error is only displayed on the 
configuration page if none of the file servers were successfully connected. 

1A PRINTER 
NUMBER NOT 
DEFINED

A NetWare printer number for this printer has not been configured. Assign a valid printer 
number to the HP Jetdirect print server. Use a NetWare utility (such as PCONSOLE), the 
Jetdirect embedded web server, or other tool to assign a printer number. 

1B PRINTER 
NUMBER IN USE

The NetWare printer number assigned to the printer is already in use by another printer. 
Assign an unused printer number. This may also occur when a printer is power cycled, in 
which case the error goes away after the print server times out and detects the lost 
connection.

1C PRINT SERVER 
NOT DEFINED

The file server does not have a print server object that corresponds to the specified 
NetWare node name. Use printer installation software, a NetWare utility (such as 
PCONSOLE), or other tool to create the print server object. 
When the HP Jetdirect print server is configured for multiple file servers, the error is only 
displayed on the configuration page if none of the file servers made the connection. 

1D UNABLE TO 
CONNECT TO 
SERVER

Remote Printer mode error: The HP Jetdirect print server was unable to establish an SPX 
connection with the NetWare print server. Make sure that the NetWare print server is 
running and that all cables and routers are functioning correctly.

1E FAIL 
RESERVING 
PRINTER NUM

The SPX connection to the print server was lost when the HP Jetdirect print server 
attempted to reserve the printer number. This indicates a possible network problem, or a 
problem with the print server. Make sure all cables and routers are functioning correctly. 
Try restarting the print server.

1F ERR 
NEGOTIATING 
BUFFER SIZE

A failure was detected when selecting the buffer size to be used when reading print data 
from the file server. This may indicate a network problem. 
When the HP Jetdirect print server is configured for multiple file servers, the error is only 
displayed on the configuration page if none of the file servers was successfully connected. 

20 UNABLE TO 
LOGIN

A failure was detected when the HP Jetdirect print server tried to log onto the file server. 
This could be caused by the print server object not existing on the file server, or by a 
security check that prevents the print server from logging in. 
Make sure the file server name and print server object name are correct. Use PCONSOLE 
to erase the password for the print server object. Create a new print server object. 
When the HP Jetdirect print server is configured for multiple file servers, the error is only 
displayed on the configuration page if none of the file servers made the connection.

21 UNABLE TO SET 
PASSWORD

A failure was detected when the HP Jetdirect print server tried to set the password for the 
print server object. (Whenever the HP Jetdirect print server is able to log in without a 
password, it sets the password automatically.) This indicates a networking or security 
problem. Create a new print server object. 
When multiple file servers are configured, the error is only displayed on the configuration 
page if none of the file servers were successfully connected. 

Summary of Contents for jetdirect 250m








































































































































































































































































































Reviews:

No comments

Related manuals for jetdirect 250m

A10 Networks AX Series Deployment Manual preview
AX Series
Brand: A10 Networks Pages: 17
Oki T400 Guía De Instalación preview
T400
Brand: Oki Pages: 36
IBM Netfinity 6000R User Reference Manual preview
Netfinity 6000R
Brand: IBM Pages: 218
IBM eserver xSeries 440 Troubleshooting Manual preview
eserver xSeries 440
Brand: IBM Pages: 74
IBM eserver xSeries 440 Installation Manual preview
eserver xSeries 440
Brand: IBM Pages: 98
IBM eserver xSeries 440 User Manual preview
eserver xSeries 440
Brand: IBM Pages: 84
IBM Eserver xSeries 360 Type 8686 User Reference Manual preview
Eserver xSeries 360 Type 8686
Brand: IBM Pages: 184
IBM eserver xSeries 350 Installation Manual preview
eserver xSeries 350
Brand: IBM Pages: 62
IBM eServer xSeries 135 Installation Manual preview
eServer xSeries 135
Brand: IBM Pages: 62
IBM eserver pSeries 690 User Manual preview
eserver pSeries 690
Brand: IBM Pages: 212
IBM System x3690 X5 At-A-Glance Reference Manual preview
System x3690 X5
Brand: IBM Pages: 32
IBM System x3690 X5 At-A-Glance Manual preview
System x3690 X5
Brand: IBM Pages: 33
IBM System x3690 X5 Installation And User Manual preview
System x3690 X5
Brand: IBM Pages: 180
IBM pSeries 670 Service Manual preview
pSeries 670
Brand: IBM Pages: 1032
TallyGenicom LA550N User Manual preview
LA550N
Brand: TallyGenicom Pages: 145
Tally T2265 SprintPro Reference Manual preview
T2265 SprintPro
Brand: Tally Pages: 217
TallyGenicom 2248 Product Manual preview
2248
Brand: TallyGenicom Pages: 12
Oki C3000 Series Manual preview
C3000 Series
Brand: Oki Pages: 62

Brands by name

Popular brands

Load more brands