English
59
3 Troubleshooting Your PC Workstation
If Your PC Workstation Does Not Start Properly
If a POST Error Message Is Displayed
The Power-On-Self-Test (POST) can detect both an error and a change
to the configuration. In either case, a code and short description is
displayed. Depending on the message, one or more of these choices is
displayed:
•
Press
to ignore the message and continue.
•
Press
to
run
the
Setup
program and correct a system
configuration error. HP recommends that you correct the error
before proceeding, even if the PC Workstation appears to start
successfully.
•
Press
to accept (validate) the change and update the
Setup
program’s configuration information.
•
Press
to see more details about the message. After viewing
these details, you are returned to the original POST display screen.
If the message is actually a change to the configuration you have
made (for example, you have just removed some memory), you can
then press
to accept the change and update the
Setup
program’s
configuration information. Otherwise, press
to ignore the
message and continue, or press
to run the
Setup
program and
correct a system configuration error. (The number of choices
available is dependent on the kind of error.)
mamdt.bk : mamdt3.fb4 Page 59 Tuesday, August 5, 1997 4:20 PM
Summary of Contents for Kayak XA
