English
65
3 Troubleshooting Your PC Workstation
If Your PC Workstation Has a Hardware Problem
If nothing is displayed on the screen at all, but the PC Workstation
starts and the keyboard, disk drives, and other peripheral devices seem
to operate properly:
•
Check that the display is plugged in and turned ON.
•
Check that you have entered a password if you have set the keyboard
and mouse to be locked after a certain period of inactivity (refer to
the Autosoft Lock item in the
Setup
program (Security
➜
User
Password)).
•
Check that the brightness and contrast controls are properly set.
•
Check that the display video cable is correctly connected.
•
Turn off the display, and unplug it from the power outlet. Disconnect
the video cable and examine the video cable connector pins. If the
pins are bent, carefully straighten them.
•
If you have installed a video upgrade module, check that it is
properly installed.
mamdt.bk : mamdt3.fb4 Page 65 Tuesday, August 5, 1997 4:20 PM
Summary of Contents for Kayak XA
