3 Troubleshooting Your PC Workstation
If Your PC Workstation Has an Audio Problem
74
English
4
Click the Enable Hardware Volume Control checkbox, and then click
OK to exit.
5
Check that the HP Front Panel Volume Control is enabled by first
double-clicking the speaker symbol
in the right corner of the
taskbar. Then select the Volume Control window and try to move the
volume level. If the volume level does not move, the HP Front Panel
Volume Control has been enabled.
Enabling the HP Front
Panel Volume Control
Under Windows NT
3.51
You can enable the HP Front Panel Volume Control from the Main
program group as follows:
1
Open the Main program group and then double-click the Control
Panel.
2
Double-click the Drivers icon.
3
In the Installed Drivers list, select
Analog Devices SoundComm
Driver
, click Setup, then click the Setting tab.
4
Click the Enable Hardware Volume Control checkbox, and then click
OK to exit.
5
Check that the HP Front Panel Volume Control is enabled by
selecting the Volume Control program in the Accessories group, then
try to move the volume level. If the volume level does not move, the
Front Panel Volume Control has been enabled.
Other Audio Problems
If your PC Workstation has other audio problems, refer to the online
guide
Using Sound on Your PC
.
mamdt.bk : mamdt3.fb4 Page 74 Tuesday, August 5, 1997 4:20 PM
Summary of Contents for Kayak XA
