English
17
1 How to Install Accessories In Your Desktop PC Workstation
Installing Mass Storage Devices
Installing a Drive in a Front-Access Shelf
These instructions explain how to install a drive (such as a floppy disk
drive, CD-ROM drive, CD-RW drive, or tape drive) in one of the front-
access drive shelves. You should also refer to the manual supplied with
the drive for any additional installation instructions.
Before Installing an
IDE Device
Refer to the drive’s installation guide to see if you must set jumpers or if
there is a special installation procedure to follow.
Before Installing a
SCSI Device
If you are installing a SCSI device, refer to “Before Installing a SCSI Hard
Disk” on page 11, before using the following instructions.
1
Disconnect the computer’s power cord and any LAN or
telecommunications cable.
2
Remove the computer’s cover (refer to page 3).
3
Remove the metal filler plate from the front of the PC Workstation’s
case.
Remove the
metal filler plate.
ashaki.bk : ashak-2.fb4 Page 17 Thursday, September 10, 1998 5:58 PM