2 How to Install Accessories In Your Minitower PC Workstation
Installing Mass Storage Devices
40
English
Installing a Hard Disk Drive in a Front-Access Shelf
1
Disconnect the computer’s power cord and any LAN or
telecommunications cable.
2
Remove the computer’s cover (see page 27).
3
Remove the fan connection to the system board (see the illustration
on page 31).
4
Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation’s case.
5
Slide out the power supply to provide better access to the disk drive
cables (see page 31).
6
Unscrew and remove an unused drive tray.
7
Mount the drive on the tray as shown below.
Remove the
drive tray
Set the drive on
the tray
Fix the drive to
the tray
ashaki.bk : asham-2.fb4 Page 40 Thursday, September 10, 1998 5:58 PM