2 How to Install Accessories In Your Minitower PC Workstation
Installing Accessory Boards
50
English
7
Secure the board by replacing the slot cover screw.
If you loosened the screws on adjacent slots, remember to tighten
them.
8
Install any other accessories before replacing the cover (see page
27). Reconnect all cables and power cords.
Completing the
Installation of an ISA
Accessory Board
If you have installed an ISA accessory board that uses any interrupt,
you must run the
Setup
program and reserve the IRQ for the accessory
board.
1
Turn on the PC Workstation and press
F2
when
F2 Setup
appears.
2
In the
Setup
program, select the
Advanced
menu and the
ISA Resource
Exclusion
submenu. A list of IRQs and the devices that use them are
displayed. Highlight the IRQ field you want to change, for example
IRQ 11
.
3
You can use the space bar or press
F7
or
F8
to make the IRQ available
for PCI (
Available
) or make it unavailable for PCI (
Reserved
).
4
Press
F3
to save any changes you made and exit the
Setup
program.
NOTE
You should always leave at least one IRQ available for use by the
integrated PCI devices.
Secure the board
in position
ashaki.bk : asham-2.fb4 Page 50 Thursday, September 10, 1998 5:58 PM
