background image

26

“Management” Menu

To open the “Management” menu:
1. Press the “Menu” button to open the On Screen Display (OSD) menus.

2. Use the 

 or 

 buttons to open the “Management” menu tab.

3. Press the 

 

 buttons to select one of the following items:

Menu Location

Choose the Menu location on the display screen.

Projection Direction

  Front-Desktop: The image used in standard desktop operation.

  Rear-Desktop: The image is reversed for projection from behind

a translucent screen.

  Front-Ceiling: The image is turned upside down for ceiling-

mounted projection.

  Rear-Ceiling: The image is reversed and turned upside down

for ceiling-mounted projection from behind a
translucent screen.

Signal Type

Select the desired signal type - RGB, YCrCb and YPrPb sources.

Lamp Hour

Displays the lamp’s elapsed operating time (in hours).

Reset Lamp Hours

Reset the lamp setting only when the lamp is replaced.

Reset this Menu

Choose “Yes” to return the display parameters (except for Lamp Hours) on
this menu to their factory default settings.

Machine Reset

Choose “Yes” to return the display parameters (except for Lamp Hours) on
ALL menus to their factory default settings.

user

controls

xb31 sb21

NOTE:

The hp sb21’s OSD
does not include an
Audio menu.

Summary of Contents for L1511A











































Reviews: