HP LaserJet 4250 User Manual Download

Page: 209 / 223

FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend

making it free software that everyone can redistribute and change. You can do so by permitting redistribution under

these terms (or, alternatively, under the terms of the ordinary General Public License).

To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each

source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright"

line and a pointer to where the full notice is found.

This library is free software; you can redistribute it and/or modify it under the terms of the GNU

Library General Public License as published by the Free Software Foundation; either version 2 of the

License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without

even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

GNU Library General Public License for more details.

You should have received a copy of the GNU Library General Public License along with this library; if

not, write to the Free Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Also add information on how to contact you by electronic and paper mail.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright

disclaimer" for the library, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking

knobs) written by James Random Hacker.

<signature of Ty Coon>, 1 April 1990

Ty Coon, President of Vice

That's all there is to it!

====================================================================

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the

following conditions are met:

Summary of Contents for LaserJet 4250
































































































































































































































Search results

Summary of Contents for LaserJet 4250

Reviews:

Related manuals for LaserJet 4250

Brands by name

Popular brands

HP LaserJet 4250, User Manual

Search results

Summary of Contents for LaserJet 4250

Reviews:

Related manuals for LaserJet 4250

Brands by name

Popular brands