Hardware options installation 23
5.
Install the hard drive.
6.
Close the bezel.
7.
Resume normal server operations.
8.
Determine the status of the drive from the hot-plug SAS hard drive LED combinations ("
SAS and SATA
hard drive LED combinations
" on page
60
).
Hard drive LED cable option
This section provides the following procedures:
•
Installing the LED cable (ML110 G4) (on page
24
)
•
Installing the LED cable (ML150 G3) (on page
27
)
•
Installing the LED cable (ML110 G5, ML115 G5, and ML150 G5) (on page
29
)