Hardware options installation 36
3.
Remove the access panel ("
Access panel
" on page
11
).
4.
Access the removable media cage.
5.
Remove the bezel blank.
NOTE:
HP recommends that you remove all bezel blanks to facilitate drive installation.
6.
Depending on the server, obtain the screws from one of the following locations:
o
Bezel blank
o
Chassis
o
Accessory kit
7.
Install the screws on the media device:
o
For the HP ProLiant ML110 Generation 5 Server, install the screws in the top screw holes.
o
For all other servers, install the screws in the bottom screw holes.