Removal and replacement procedures 40
7.
Use a T-15 Torx screwdriver to loosen the captive screws securing the midplane cover to the chassis,
and then remove the midplane cover.
To replace the component, reverse the removal procedure.
Fan louver
To remove the component:
1.
Power down the chassis (on page
2.
Open the cable management arm (on page
3.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the chassis.
4.
Disconnect all peripheral devices from the chassis.
5.
Extend the chassis from the rack (on page
6.
Remove the access panel (on page
7.
Remove the midplane cover ("
" on page
Summary of Contents for Moonshot 1500
Page 12: ...Customer self repair 12 ...
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...