Installing the chassis 35
3.
Align and install the switch module into the chassis.
4.
Do one of the following:
o
If the uplink module is already installed, verify the switch module powers on and the health LED is
green.
o
If the uplink module is not installed, install the uplink module before verifying LEDs.
For more information, see "Switch information and guidelines (on page
)."
5.
Install the access panel, and then return the chassis to the rack.
6.
After both components have been installed, verify the switch firmware is at the HP recommended
firmware version. For more information, see the HP Moonshot Component Pack download website
Summary of Contents for Moonshot 1500
Page 57: ...Support and other resources 57 ...