Removal and replacement procedures 24
4.
After performing the installation or maintenance procedure, slide the chassis back into the rack, and
then press the chassis firmly into the rack to secure it in place.
Remove the access panel
IMPORTANT:
After performing a procedure inside the chassis, always install the access panel on
the chassis when complete. Do not operate the chassis for long periods of time with the access
panel removed.
IMPORTANT:
To maintain appropriate cooling, fans will operate at a high speed when the
access panel is removed.
IMPORTANT:
When the access panel is removed, the cartridge might be placed into a low
power operating state to reduce thermal stress.
To remove the component:
1.
If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch.
2.
Open the locking latch.
The access panel slides back, releasing it from the chassis.
Summary of Contents for Moonshot 1500
Page 12: ...Customer self repair 12 ...
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...