Removal and replacement procedures 38
To replace the component, reverse the removal procedure.
Cartridge blank
CAUTION:
For proper cooling, be sure that a cartridge or a cartridge blank is always installed
in each cartridge slot in the chassis. When replacing a cartridge, leave the cartridge slot empty
for no more than 30 seconds. Failure to do so can disrupt airflow in the chassis.
To remove the component:
1.
Extend the chassis from the rack (on page
2.
Remove the access panel (on page
3.
Remove the cartridge blank from the chassis.
To replace the component, reverse the removal procedure.
Front chassis blank
To remove the component:
1.
Extend the chassis from the rack (on page
2.
Summary of Contents for Moonshot 1500
Page 12: ...Customer self repair 12 ...
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
