NOTE:
Details are not available for all accessories. The following specifications were available at the time of publication.
HP 1-port Power Injector
(J9407B)
Physical characteristics
Dimensions
5.71(d) x 2.36(w) x 1.22(h) in. (14.5 x 6 x 3.1 cm)
Weight
1 lb. (0.45 kg)
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
5% to 93%, noncondensing
Nonoperating/Storage
temperature
-4°F to 158°F (-20°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 10,000 ft. (3 km)
Electrical characteristics Voltage
100-240 VAC
Current
0.3/0.2 A
Frequency
50/60 Hz
Notes
IEEE 802.3af compliant
Safety
UL 60950; EN 60950
Emissions
EN 55024; EN 55022 (CISPR 22) Class B with FTP Cabling; FCC Part 15, Class B
with FTP cabling
Notes
The 1-port power converter has 1 AC power cord input, 1 RJ-45 10/100/1000
Mbps port for data coming from the network infrastructure, and 1 RJ-45 for
data plus IEEE 802.3af-compliant PoE for Gigabit Ethernet to power the
access point.
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP Indoor Omnidirectional Dual Band 2.5/6dBi MIMO 6 Element Antenna
(J9659A)
Electrical characteristics Frequency range 1
2400 - 2500
Gain 1 dBi (with antenna
cable)
2.5
Frequency range 2
5150 - 5850
Gain 2 dBi (with antenna
cable)
5.9
VSWR max
2:0
H-Plane (3 dB beamwidth)
Omnidirectional
Polarization
Linear (vertical)
Impedance (Ohms)
50
RF connector
Reverse SMA (male)
Cable length
2.75 ft. (0.84 m)
QuickSpecs
HP MSM-802.11n Dual Radio Access Point Series
Accessory Product Details
DA - 13994 North America — Version 10 — December 9, 2013
Page 28