205
Step Command
Remarks
4.
Advertise a default route to an
MBGP peer or peer group.
peer
{
group-name
|
ip-address
}
default-route-advertise
[
route-policy
route-policy-name
]
Not advertised by default.
NOTE:
After you configure the
peer
default-route-advertise
command, the router sends a default route with the
next hop as itself to the specified MBGP peer or peer group, whether the default route is available or not
in the routing table.
Configuring outbound MBGP route filtering
If several filtering policies are configured, they are applied in the following sequence:
•
filter-policy export
•
peer filter-policy export
•
peer as-path-acl export
•
peer ip-prefix export
•
peer route-policy export
Only the routes that have passed all the configured policies can be advertised.
To configure BGP route distribution filtering policies:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp
as-number
N/A
3.
Enter IPv4 MBGP
address family view.
ipv4-family multicast
N/A
