350
RP: 1003::2
Protocol: pim-sm, Flag: SPT ACT
UpTime: 00:02:15
Upstream interface: Serial2/0
Upstream neighbor: 1002::2
RPF prime neighbor: 1002::2
Downstream interface(s) information:
Total number of downstreams: 1
1: Ethernet1/1
Protocol: pim-sm, UpTime: 00:02:15, Expires: 00:03:06
# Display IPv6 PIM multicast routing table information on Router D.
[RouterD] display pim ipv6 routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(4001::100, FF0E::100)
RP: 1003::2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 00:14:44
Upstream interface: Ethernet1/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Pos5/0
Protocol: mld, UpTime: 00:14:44, Expires: 00:02:26
# Display IPv6 PIM routing table information on Router E.
[RouterE] display pim ipv6 routing-table
Total 1 (*, G) entry; 0 (S, G) entry
(*, FF0E::100)
RP: 1003::2 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:16:56
Upstream interface: Register
Upstream neighbor: 4002::1
RPF prime neighbor: 4002::1
Downstream interface(s) information:
Total number of downstreams: 1
1: Pos5/2
Protocol: pim-sm, UpTime: 00:16:56, Expires: 00:02:34
IPv6 PIM-SM admin-scoped zone configuration example
Network requirements
The receivers receive VOD information through multicast. The entire IPv6 PIM-SM domain is divided into
IPv6 admin-scoped zone 1, IPv6 admin-scoped zone 2, and the IPv6 global-scoped zone. Router B,
Router C, and Router D are ZBRs of the three domains, respectively.