Endurance Server Maintenance
9-13
Replacing the IL Fiber or Cable
The IL provides a direct Ethernet connection between the IOPs.
Caution:
Before proceeding, make sure you are properly grounded using,
for instance, a wrist strap with an attached alligator clip that is
connected to an appropriate ground.
To replace an IL fiber or cable:
Step
Action
Notes
1
Obtain a replacement IL cable.
Obtain the appropriate fiber or cable that meets
the specifications for your Ethernet adapter.
2
Decide which IOP can be removed with
the least impact to your system, and
shut down that IOP, as described on
page 9-5
.
3
Detach the IL cable from the NICs in
IOP1 and IOP2.
Verify that all client networks remain
online
.
4
Install the new IL cable by attaching it to
IOP1 and IOP2.
5
Reboot the IOP that you shut down in
step 2
.
6
Using Endurance Manager:
• Reenable any
faulted
or
disabled
components (
page 9-31
).
• Make sure that any components
affected by this procedure are
active
or
online
.
Summary of Contents for NetServer AA 6200
