Chapter 1
Setting Up the HP NetServer E 60
4
Add PCI Boards
Note that slot assignments of disk drive controller
cards affects boot order.
For details see Chapter 6, "Installing Additional
Boards."
Add a Processor
The HP NetServer E 60 supports either
Pentium II or Pentium III processors. Do not mix
Pentium II and Pentium III processors in the
system. Do not mix processors with different
clock speeds in the system.
For details see Chapter 7, "Installing a Second
Processor."
Replace the Cover
Be sure cables are properly routed and all
components are fully seated.
For details see Chapter 3, "Removing and
Replacing the System Cover."