Chapter 5
Installing Additional Memory
30
4. Lay the server on its side (components showing).
5. Unsnap the air duct and move it out of the way (refer to Figure 4-1).
CAUTION
The memory modules are sensitive to static electricity and
can be easily damaged by improper handling. Do the
following when handling the accessory kit:
Leave the memory module in the anti-static container until
you are ready to install it.
Use an anti-static wrist strap and a grounding mat.
Before you remove a memory module from the anti-static
container, touch a grounded, unpainted metal surface on the
HP NetServer E 60 to discharge static electricity.
6. Locate the DIMM sockets (see Figure 5-1).
DIMM Slots
0
1
2 3
Figure 5-1. DIMM Locations on System Board
