Battery
Description
Spare part number
Battery, 2-cell, 3.10-WHr, 4.19-AHr, Li-ion (includes cable)
739807-001
Before removing the battery, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 20
).
5.
Disconnect the battery cable from the system board (see
Power button board on page 22
).
6.
Remove the volume button board (see
Volume button board on page 23
).
7.
Remove the audio board (see
Audio board on page 30
).
WARNING!
To reduce potential safety issues, use only the battery provided with the tablet, a
replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
Removing a battery that is the sole power source for the tablet can cause loss of
information. To prevent loss of information, save your work or shut down the tablet through Windows
before removing the battery.
Remove the battery:
1.
Release the wireless antenna cables
(1)
and
(2)
from the routing clips and channels built into
the battery.
2.
Release the ZIF connector
(3)
to which the TouchScreen board cable is attached, and then
disconnect the TouchScreen board cable from the system board.
Battery
33
Summary of Contents for Omni10
Page 4: ...iv Safety warning notice ...
