Using the Recovery CD
Recovering Software
6-6
To update the OmniBook BIOS
Hewlett-Packard may update the BIOS to enhance the capabilities of the OmniBook.
Updates will be available from HP Customer Care. Visit the Support website at
http://www.hp.com/omnibook.
You may receive a BIOS update on a floppy disk or on a CD.
C A U T I O N
Because a BIOS update replaces the previous version, it is very important you
follow these instructions exactly. Otherwise, the OmniBook may be damaged.
The BIOS update process resets the configuration settings in the BIOS Setup
utility except for the PC Identification and Password.
1. If you are updating the BIOS from a CD, you’ll need to change the boot device to
CD-ROM/DVD drive. See page 4-7 for instructions.
2. From the Start menu, shut down the OmniBook.
3. Connect the ac adapter to the OmniBook.
4. Remove any PC Cards and if docked, undock the OmniBook.
5. Insert the BIOS Update disk or CD in the appropriate drive.
6. Press the blue power button.
7. When prompted, choose the correct language.
8. When prompted, press C and follow the onscreen instructions. This starts a
process that takes approximately 1 minute.
Once it begins, do not interrupt the update process.
Summary of Contents for OmniBook 2100
