HP OmniBook 6000
Troubleshooting and Diagnostics
3-29
Power Menu
Default
Windows 2000 uses only the settings marked with *. Windows 98 uses only the settings marked with * or **.
All other settings in the Power menu are ignored.
Intel SpeedStep Mode*
Sets the speed used by a dual-speed processor at boot,
depending on the available power source. A separate Control
Panel power setting controls speed changes after boot.
Automatic
Power Management Mode
Disables time-outs, selects a combination of time-outs, or
allows customized time-outs.
Max. Power
Savings
Smart CPU Mode
Enables automatic CPU power savings when running on
battery power. Absence of keyboard, mouse, and hard disk
activity could cause slower CPU response.
On
Display-off Time-out
Sets the period of inactivity after which the computer enters
Display-off power mode.
2 minutes
Suspend Time-out
Sets the period of inactivity after which the computer goes
from Display-off to Standby power mode. (Skips Display-off
mode if that time-out is disabled.)
4 minutes
Hibernate Time-out**
Sets whether the computer goes from Standby to Hibernate
power mode after the indicated period of inactivity. (Skips
Standby mode if the suspend time-out is disabled.)
4 hours
Hard Disk Time-out
Sets the period of hard disk inactivity after which the internal
hard disk (and any hard disk drive in the plug-in module bay)
stops spinning.
2 minutes
Time-out on AC
Sets whether power management time-outs occur while the ac
adapter is connected.
Disabled
Lid Switch Mode
Sets the action that occurs if the computer’s lid is closed.
Turn off LCD
Resume On Serial Ring
Sets whether the system resumes if it received a ring signal.
Enabled
Resume On Time of Day
Sets whether the system resumes at a defined time of day.
Disabled
Resume Time
Sets the 24-hour time when the system resumes from if
Resume On Time of Day is enabled.
Auto Suspend on Undock*
Sets whether the computer suspends to Standby power mode
after undocking.
When Lid Closed
Auto Turn-On on Dock*
Sets whether the computer turns on after docking.
Enabled
* Windows 98 and 2000 use these settings.
** Windows 98 uses this additional setting.
Boot Menu
Default
+Removable Device
+Hard Disk
CD-ROM/DVD Drive
MBA UNDI
Shows the order of boot devices, with “+” indicating a device
category. Move the entries to change the order. If the
computer has more than one device in a category, you can
select the one scanned. MBA UNDI (Managed Boot Agent)
appears in the list only if a built-in LAN is present—it provides
diskless boot from a network server.
1. Removable
Device
2. Hard Disk
3. CD-ROM/DVD
drive
4. MBA UNDI
Exit Menu
Save Changes and Exit
Saves Setup changes, then exits and reboots.
Discard Changes and Exit
Discards any Setup changes made since last save, then exits
and reboots. Does not affect password, date, or time changes.
Get Default Values
Restores default settings, and remains in Setup. Does not
affect password, date, or time changes.
Load Previous Values
Discards any Setup changes made since last save, and
remains in Setup. Does not affect password, date, or time
changes.
Save Changes
Saves Setup changes, and remains in Setup. Security
settings are saved when changed.
Summary of Contents for OmniBook 6000
