HAFM Server Configuration
7–16
HAFM server installation guide
9. To change the date and time:
a.
Choose the month from the Date drop-down list box.
b. Click the up or down arrow adjacent to the year field and select the year.
c.
Click the day on the calendar to select the date.
d. Click in the time field and enter the desired time.
e.
Click the up or down arrow adjacent to the time field and select AM or PM.
f.
Click Apply.
10. Click OK to close the Date/Time Properties dialog box.
11. Close the Control Panel window.
Configure and Enable Call-Home Features
There are two call-home features provided. The HAFM server has a call-home feature
that provides automatic dial-out through the modem to a service support facility to
report director problems. This is provided in the shipped software.
Alternatively, the Proactive Services Call-Home feature reports events via the LAN to
a SANworks Management Appliance or other server running the HP Proactive
Services software. HP Proactive Services software is offered at no additional charge
for subsystems covered under an on-site warranty or on-site storage hardware support
contract. To order Proactive Services software, contact your Hewlett-Packard
customer service representative.
A choice of only one Call-Home feature must be selected when HAFM is installed.
The following sections describe configuring both call-home features.
IMPORTANT: As shipped, the software includes the call-home via dial-out feature. In order to
use the Proactive Services call-home, you must also order the Proactive Services software. You
can use either feature, but not both.
Configure the Call-Home via Dial-out Feature
The HAFM server has a call-home feature that provides automatic dial-out through
the modem to a service support facility to report director, switch, or HAFM server
problems. The problem is logged into the support facility’s tracking system for
resolution.
