HP Omnibook XE4400
Removal and Replacement
2-35
Caution: Wireless Models
Be careful when removing and attaching antenna cables. Damage to cables or connectors can
degrade performance.
3.
Wireless models only:
Remove the mini-PCI door and unplug the two antenna cables from the
mini-PCI card. Do not remove the mini-PCI card at this time.
4.
Remove the screws that secure the motherboard to the bottom case.
5.
Carefully lift the motherboard out of the bottom case.
6.
If present, remove the modem port cover.
Figure 2-20. Removing the Motherboard
Reassembly Notes
Wireless Models Only
•
Before installing the motherboard, make sure the round coaxial cables from the antenna PCAs are
held in place by the clips in the bottom case.
•
Make sure there is sufficient length to the front antenna PCA cables so they can easily be
connected to the mini-PCI card.
Screw,
M2.5×5mm (7)
Summary of Contents for OmniBook XE4400
