174 Alphabetical list of commands
set replication-volume-parameters
Description
Sets parameters for a specified replication volume. This command must be run separately on each
system where the volume resides; changes to these parameters are not automatically synchronized
across systems.
Syntax
set replication-volume-parameters
[link-type FC|iSCSI]
[max-queue
#
]
[max-retry-time
#
]
[monitor-interval
#
]
[on-collision newest|oldest]
[on-error retry|suspend]
[priority low|medium|high]
[remote-address ip=
IPs
|wwnn=
WWNNs
|wwpn=
WWPNs
]
[set
replication-set
]
replication-volume
Parameters
link-type FC|iSCSI
Optional. Specifies the type of ports being used for the inter-system link:
•
FC
: FC ports.
•
iSCSI
: iSCSI ports.
max-queue
#
Optional. Number of replication images to consider when determining the next image to replicate:
1–64. Used only if the
on-collision
parameter is set to
oldest
.
max-retry-time #
Optional; valid only if the
on-error
parameter is set to
retry
. Maximum time in seconds to retry
a single replication if an error occurs. Allowed values are 0–64000; the default is 1800 (30
minutes). A value of 0 means do not time out retries; that is, retry forever. By default, a retry will
occur 5 minutes after an error occurs. If another error occurs and the difference in time between
when the error occurs and the initial retry time is greater than the
max-retry-time
value, the
replication will be suspended.
In order to prevent a replication set from suspending when multiple independent, discontinuous
errors occur during a single replication, set
max-retry-time
for the secondary volume either to 0
(retry forever) or to 60 minutes for each 10GB of volume size.
monitor-interval
#
Optional. Interval in seconds at which the primary volume should query the secondary volume.
Values less than 300 (5 minutes) or greater than 1800 (30 minutes) are not allowed.
on-collision newest|oldest
Optional. Collision policy to use when the image queue depth is met:
•
newest
: Only the latest replication image should be considered for the next replication
operation.
•
oldest
: Only the latest
N
replication images should be considered for the next replication
operation, where
N
is defined by the
max-queue
parameter and the oldest of these images
should be considered first.
on-error retry|suspend
Optional. Error policy to use when errors occur during the replication process:
•
retry
: Retry the operation for the time specified in the
max-retry-time
parameter.
•
suspend
: Suspend the replication operation.
priority low|medium|high
Optional. Priority of the replication process on the replication volume: low, medium, or high.
Summary of Contents for P2000 G3
