188 Alphabetical list of commands
temperature-scale celsius|c|fahrenheit|f
Optional. Sets the scale for display of temperature values:
•
fahrenheit
or
f
: Temperatures are shown in degrees Fahrenheit.
•
celsius
or
c
: Temperatures are shown in degrees Celsius. This is the default.
timeout
#
Optional. Sets the timeout value in seconds for the login session. Valid values are 120–43200
seconds (2–720 minutes). The default is 1800 seconds (30 minutes).
trap-host
IP-address
Optional. For an SNMPv3 user whose
interface
parameter is set to
snmptarget
, this specifies
the IP address of the host that will receive SNMP traps.
type novice|standard|advanced|diagnostic
Optional. Identifies the user’s experience level. The default is
standard
.
units auto|MB|GB|TB
Optional. Sets the unit for display of storage-space sizes:
•
auto
: Sizes are shown in units determined by the system. This is the default.
•
MB
: Sizes are shown in megabytes.
•
GB
: Sizes are shown in gigabytes.
•
TB
: Sizes are shown in terabytes.
Based on the
precision
setting, if a size is too small to meaningfully display in the selected unit,
the system uses a smaller unit for that size. For example, if
units
is set to TB,
precision
is set to
1, and
base
is set to 10, the size 0.11709 TB is instead shown as 117.1 GB.
name
Specifies the user account to change. Names are case sensitive.
Example
Change the temperature scale and accessible interfaces for user
jsmith
:
# set user jsmith temperature-scale f interfaces wbi,cli
Success: Command completed successfully. - The settings were changed
successfully. (2012-01-21 14:39:50)
Change the password for user
JDoe
:
# set user JDoe password Abcd%1234
Success: Command completed successfully. - The settings were changed
successfully. (2012-01-21 14:39:56)
Change the authentication type for SNMPv3 user
Traps
:
# set user Traps authentication-type MD5 password Snmp%Trap
Success: Command completed successfully. - The settings were changed
successfully. (2012-01-12 14:40:10)
For the only CLI user with the
manage
role, try to reduce the role to monitor:
# set user SysAdmin roles monitor
Error: At least one CLI user must retain configuration privileges at all times.
(2013-10-31 14:10:47)
See also
•
set password
•
show users
Summary of Contents for P2000 G3
