HP P2000 G3 MSA System CLI Reference Guide 255
Show network parameters for a storage system in which controller A is set to auto-negotiate at a link
speed up to 100 MB/s in full-duplex mode with a connected Ethernet switch:
# show network-parameters
Network Parameters Controller A
-------------------------------
IP Address: 172.22.1.200
Gateway: 172.22.1.1
Subnet Mask: 255.255.255.0
MAC Address:
value
Addressing Mode: Manual
Link Speed: 100mbps
Duplex Mode: Full
Auto Negotiation: Enabled
...
Network Parameters Controller B
-------------------------------
IP Address: 172.22.1.201
Gateway: 172.22.1.1
Subnet Mask: 255.255.255.0
MAC Address:
value
Addressing Mode: Manual
Link Speed: Unknown
Duplex Mode: Undefined
Auto Negotiation: Disabled
...
Basetypes
•
network-parameters
•
status
See also
•
set network-parameters
Summary of Contents for P2000 G3
