HP P2000 G3 MSA System CLI Reference Guide 289
show snmp-parameters
Description
Shows SNMP settings for event notification.
Syntax
show snmp-parameters
Output
SNMP Trap Notification Level
•
crit
: Only Critical events are sent as traps.
•
error
: Error and Critical events are sent as traps.
•
warn
: Warning, Error, and Critical events are sent as traps.
•
info
: All events are sent as traps.
•
none
: No events are sent as traps and traps are disabled.
SNMP Trap Host IP
#
IP address of each trap host.
SNMP read community
Community string for read-only access (not shown to Monitor users).
SNMP write community
Community string for write access (not shown to Monitor users).
Example
Show SNMP notification settings:
# show snmp-parameters
SNMP Trap Notification Level: crit
SNMP Trap Host IP1: 172.22.4.171
SNMP Trap Host IP2: 0.0.0.0
SNMP Trap Host IP3: 0.0.0.0
SNMP read community: public
SNMP write community: private
Success: Command completed successfully. (2012-01-19 15:27:59)
Basetypes
•
snmp-parameters
•
status
See also
•
set snmp-parameters
•
set protocols
•
show protocols
Summary of Contents for P2000 G3
