328 Alphabetical list of commands
start vdisk
Description
Restarts a vdisk that was stopped in order to move its disks into this system.
Starting a vdisk is part of the process for moving a secondary volume from a primary system into a
secondary system. The process to move a secondary volume is:
1.
In the system where the secondary volume resides:
a.
Detach the secondary volume.
b.
If the secondary volume’s vdisk contains other secondary volumes, detach those volumes.
c.
Stop the secondary volume’s vdisk.
d.
If the secondary volumes’ snap pools are in other vdisks, stop those vdisks.
e.
Move the vdisks into the secondary system. This system must support the link type that the
replication set is configured to use. For example, if the replication set’s link type is configured
to use FC links, the secondary system must have FC ports.
2.
In the secondary system:
a.
Start the snap pools’ vdisks.
b.
Start the secondary volumes’ vdisks.
c.
Reattach the secondary volumes.
NOTE:
If the replication set was deleted before the secondary volume was reattached, you can
clean up this remnant by reattaching the secondary volume, setting it to be the primary volume (by
using the set replication-external-view command), and then deleting the replication set again.
Syntax
start vdisk
vdisk
Parameters
vdisk
Name or serial number of the vdisk to start. For vdisk syntax, see
Command syntax
on page 22.
Example
Start vdisks
vd2
and
vd1
, which respectively contain a snap pool and the associated secondary
volume:
# start vdisk vd2
Success: Command completed successfully. (2012-01-21 12:26:32)
# start vdisk vd1
Success: Command completed successfully. (2012-01-21 12:26:37)
See also
•
detach replication-volume
•
reattach replication-volume
•
show vdisks
•
stop vdisk
Summary of Contents for P2000 G3
