HP P2000 G3 Cli Reference Manual Download

Page: 336 / 532

336 Alphabetical list of commands

unmap volume

Description

Deletes explicit mappings or the default mapping for specified volumes. When an explicit mapping

is deleted, access by that host to the volume is controlled by the volume’s default mapping (described

in help for

create volume

). When a default mapping is deleted, access by hosts to the volume is

controlled by any explicit mappings of those hosts to the volume.
If you want to mask access for a specific host to a specific volume, use the

map volume

command

and set the access parameter to

no-access

Syntax

unmap volume

[host

hosts

]

volumes

Parameters

host

hosts

Optional. For FC and SAS, the nickname or 16-hex-digit WWPN of each host to unmap the volumes

from. For iSCSI, the iSCSI node name (typically the IQN) or nickname of each initiator to unmap the

volumes from. If the

host

parameter is omitted, mapping changes apply to all hosts not explicitly

mapped (that is, to the default mapping).

volumes

Names or serial numbers of the volumes to unmap. For volume syntax, see

Command syntax

page 22.

Example

Delete explicit mappings of

Host1

to volumes

and

(leaving the default mappings

unchanged):

# unmap volume host Host1 V1,V3

Info: The volume was unmapped. (V1) (2012-01-20 14:34:24)

Info: The volume was unmapped. (V3) (2012-01-20 14:34:24)

Success: Command completed successfully. - The volume(s) were unmapped.
(2012-01-20 14:34:24)

Delete volume

’s default mapping (leaving explicit mappings unchanged):

# unmap volume V2

Info: The volume was unmapped. (V2) (2012-01-20 14:34:34)

Success: Command completed successfully. - The volume(s) were unmapped.
(2012-01-20 14:34:24)

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Related manuals for P2000 G3

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Related manuals for P2000 G3

Brands by name

Popular brands