HP P2000 G3 MSA System CLI Reference Guide 349
auto-write-back
string
Shows whether the cache policy will change from write-through to write-back
when the trigger condition is cleared.
•
Disabled
: Auto-write-back is disabled.
•
Enabled
: Auto-write-back is enabled. This is the default.
auto-write-
back-numeric
string
Numeric equivalents for
auto-write-back
values.
•
0: Disabled
•
1: Enabled
disk-dsd-enable
string
Shows whether available disks and global spares will spin down after a period
of inactivity shown by the
disk-dsd-delay
property.
•
Disabled
: Drive spin down for available disks and global spares is
disabled. This is the default.
•
Enabled
: Drive spin down for available disks and global spares is
enabled.
disk-dsd-
enable-numeric
string
Numeric equivalents for
disk-dsd-enable
values.
•
0: Disabled
•
1: Enabled
disk-dsd-delay
uint16
Specifies the period of inactivity in minutes after which available disks and
global spares will spin down. The default is 15 minutes. The value 0 means spin
down is disabled.
background-
disk-scrub
string
Shows whether disks that are not in vdisks are automatically checked for disk
defects to ensure system health. The interval between background disk scrub
finishing and starting again is 72 hours.
•
Disabled
: Background disk scrub is disabled. This is the default.
•
Enabled
: Background disk scrub is enabled.
background-
disk-scrub-
numeric
string
Numeric equivalents for
background-disk-scrub
values.
•
0: Disabled
•
1: Enabled
managed-logs
string
Shows whether the managed logs feature is enabled, which allows log files to
be transferred from the storage system to a log-collection system to avoid losing
diagnostic data as logs fill.
•
Disabled
: The managed logs feature is disabled. This is the default.
•
Enabled
: The managed logs feature is enabled.
managed-logs-
numeric
string
Numeric equivalents for
managed-logs
values.
•
0: Disabled
•
1: Enabled
single-
controller
string
For a system that had two controller modules but now has only one and is
intended to be used as a single-controller system, this property shows whether
the operating/redundancy mode is set to Single Controller. This prevents the
system from reporting the absent partner controller as an error condition. This
parameter does not affect any other system settings. Installing a second,
functional controller module will change the mode to Active-Active ULP.
•
Enabled
: Single Controller mode is enabled.
•
Disabled
: Single Controller mode is disabled.
single-
controller-
numeric
string
Numeric equivalents for
single-controller
values.
•
0: Disabled
•
1: Enabled
Table 9
advanced-settings-table properties (continued)
Name
Type
Description
Summary of Contents for P2000 G3
