370 XML API basetype properties
Example
# show controllers
...
<OBJECT basetype="controllers" name="controllers" oid="1" format="pairs">
<PROPERTY name="durable-id" type="string">controller_a</PROPERTY>
<PROPERTY name="controller-id" type="string">A</PROPERTY>
<PROPERTY name="controller-id-numeric" type="string">1</PROPERTY>
<PROPERTY name="serial-number" type="string">
SN
</PROPERTY>
<PROPERTY name="hardware-version" type="string">52</PROPERTY>
<PROPERTY name="cpld-version" type="string">23</PROPERTY>
<PROPERTY name="mac-address" type="string">00:C0:FF:29:41:61</PROPERTY>
<PROPERTY name="node-wwn" type="string">208000c0ff243014</PROPERTY>
<PROPERTY name="ip-address" type="string">10.134.10.133</PROPERTY>
<PROPERTY name="ip-subnet-mask" type="string">255.255.0.0</PROPERTY>
<PROPERTY name="ip-gateway" type="string">10.134.0.1</PROPERTY>
<PROPERTY name="disks" type="uint32">45</PROPERTY>
<PROPERTY name="virtual-disks" type="uint32">5</PROPERTY>
<PROPERTY name="cache-memory-size" type="uint32">2048</PROPERTY>
<PROPERTY name="host-ports" type="uint32">2</PROPERTY>
<PROPERTY name="drive-channels" type="uint32">2</PROPERTY>
<PROPERTY name="drive-bus-type" type="string">SAS</PROPERTY>
<PROPERTY name="drive-bus-type-numeric" type="string">8</PROPERTY>
<PROPERTY name="status" type="string">Operational</PROPERTY>
<PROPERTY name="status-numeric" type="string">0</PROPERTY>
<PROPERTY name="failed-over" type="string">No</PROPERTY>
<PROPERTY name="failed-over-numeric" type="string">0</PROPERTY>
<PROPERTY name="fail-over-reason" type="string">Not applicable</PROPERTY>
<PROPERTY name="fail-over-reason-numeric" type="string">0</PROPERTY>
<PROPERTY name="sc-fw" type="string">T240R14-01</PROPERTY>
<PROPERTY name="vendor" type="string">
vendor
</PROPERTY>
<PROPERTY name="model" type="string">
model
</PROPERTY>
<PROPERTY name="sc-cpu-type" type="string">Intel Tolapai</PROPERTY>
<PROPERTY name="sc-cpu-speed" type="sint32">1200</PROPERTY>
<PROPERTY name="internal-serial-number" type="string">
SN
</PROPERTY>
<PROPERTY name="cache-lock" type="string">No</PROPERTY>
<PROPERTY name="cache-lock-numeric" type="string">0</PROPERTY>
<PROPERTY name="write-policy" type="string">write-back</PROPERTY>
<PROPERTY name="write-policy-numeric" type="string">0</PROPERTY>
<PROPERTY name="description" type="string">
description
</PROPERTY>
<PROPERTY name="part-number" type="string">
PN
</PROPERTY>
<PROPERTY name="revision" type="string">50</PROPERTY>
redundancy-
mode-numeric
string
Numeric equivalents for
redundancy-mode
values.
•
2: Active-Active ULP
•
3: Single Controller
•
4: Fail Over
•
5: Down
redundancy-
status
string
•
Redundant
: Both controllers are operational.
•
Operational but not redundant
: In active-active mode, one
controller is operational and the other is offline. In single-controller mode,
the controller is operational.
•
Down
: This controller is not operational.
•
Unknown
: Status information is not available.
redundancy-
status-numeric
string
Numeric equivalents for
redundancy-status
values.
•
0: Operational but not redundant
•
3: Redundant
•
4: Down
•
5: Unknown
Table 19
controllers properties (continued)
Name
Type
Description
Summary of Contents for P2000 G3
