HP P2000 G3 MSA System CLI Reference Guide 385
drive-parameters
Properties
Table 24
drive-parameters properties
Name
Type
Description
smart
string
Shows whether SMART (Self-Monitoring Analysis and Reporting Technology) is
enabled or disabled for disks.
•
Detect-Only
: Each disk in the system retains its individual SMART setting,
as will new disks added to the system.
•
Enabled
: SMART is enabled for all disks in the system and will be enabled
for new disks added to the system. This is the default.
•
Disabled
: SMART is disabled for all disks in the system and will be
disabled for new disks added to the system.
smart-numeric
string
Numeric equivalents for
smart
values.
•
0: Detect-Only
•
1: Enabled
•
2: Disabled
drive-write-
back-cache
string
•
Disabled
: Disk write-back cache is disabled for all disks in the system and
will be enabled for new disks added to the system. This parameter cannot
be changed.
drive-write-
back-cache-
numeric
string
Numeric equivalents for
drive-write-back-cache
values.
•
0: Detect-Only
•
1: Enabled
•
2: Disabled
drive-timeout-
retry-max
uint8
Maximum number of times a timed-out I/O operation can be retried before the
operation is failed. The default is 3.
drive-attempt-
timeout
uint8
Number of seconds before an I/O operation is aborted and possibly retried.
The default is 8 seconds.
drive-overall-
timeout
uint8
Total time in seconds before an I/O operation is failed regardless of the
drive-attempt-timeout
and
drive-timeout-retry-max
settings. The
default is 105 seconds.
disk-dsd-enable
string
Shows whether available disks and global spares will spin down after a period
of inactivity shown by the
disk-dsd-delay
property.
•
Disabled
: Drive spin down for available disks and global spares is
disabled. This is the default.
•
Enabled
: Drive spin down for available disks and global spares is
enabled.
disk-dsd-
enable-numeric
string
Numeric equivalents for
disk-dsd-enable
values.
•
0: Disabled
•
1: Enabled
disk-dsd-
enable-pool
string
Not applicable.
disk-dsd-
enable-pool-
numeric
string
Not applicable.
Summary of Contents for P2000 G3
