HP P2000 G3 MSA System CLI Reference Guide 477
snmp-parameters
Properties
Example
# show snmp-parameters
...
<OBJECT basetype="snmp-parameters" name="snmp-parameters" oid="1">
<PROPERTY name="snmp-enabled" type="string">Enabled</PROPERTY>
<PROPERTY name="snmp-enabled-numeric" type="string">1</PROPERTY>
<PROPERTY name="snmp-filter" type="string">error</PROPERTY>
<PROPERTY name="snmp-filter-numeric" type="string">12</PROPERTY>
<PROPERTY name="snmp-trap-host-1" type="string">10.128.38.188</PROPERTY>
<PROPERTY name="snmp-trap-host-2" type="string">0.0.0.0</PROPERTY>
<PROPERTY name="snmp-trap-host-3" type="string">0.0.0.0</PROPERTY>
<PROPERTY name="snmp-read-community" type="string">public</PROPERTY>
<PROPERTY name="snmp-write-community" type="string">private</PROPERTY>
</OBJECT>
...
Table 77
snmp-parameters properties
Name
Type
Description
snmp-enabled
string
Shows whether the Simple Network Management Protocol (SNMP) interface is
enabled or disabled.
•
Disabled
: SNMP is disabled. This is the default.
•
Enabled
: SNMP is enabled.
snmp-enabled-
numeric
string
Numeric equivalents for
snmp-enabled
values.
•
0: Disabled
•
1: Enabled
snmp-filter
string
Minimum level of events to include for SNMP traps.
•
crit
: Only critical events are sent as traps.
•
error
: Error and critical events are sent as traps.
•
warn
: Warning, error, and critical events are sent as traps.
•
info
: All events are sent as traps.
•
none
: No events are sent as traps and traps are disabled. This is the default.
snmp-filter-
numeric
string
Numeric equivalents for
snmp-filter
values.
•
0: none
•
1: info
•
2: error
•
4: warn
•
8: crit
snmp-trap-host-
1
string
Trap host IP address.
snmp-trap-host-
2
string
Trap host IP address.
snmp-trap-host-
3
string
Trap host IP address.
snmp-read-
community
string
Community string for SNMP read-only access (not shown to Monitor users). The
default is
public
.
snmp-write-
community
string
Community string for SNMP write access (not shown to Monitor users). The
default is
private
.
Summary of Contents for P2000 G3
