Chapter 5
Logging In and Using the HP Server Remote Management Card Web Interface
6. At the password prompt, enter the password that belongs to the
administrator name. For your first login, the factory default password is
ADMIN.
NOTE
The user ID and the access password for the HP Server
Remote Management Card software are case sensitive.
CAUTION
To avoid a potential security breach allowing someone to log
in using the defaults, your first task should be to set up an
administrator for the card. Under Configuration|User, create a
new user assigned to the "Administrator" group and assign a
new password. Then delete the default ADMIN user account.
7. Once logged into the HP Server Remote Management Card web interface,
create your user groups and set your communication and notification
preferences. If you have HP Toptools Device Manager, you can perform
some administration actions on multiple cards at once. See online help for
details (click the "?" button in the upper right corner of the browser
window).
Using the HP Server Remote Management Card
Web Interface
You can use the HP Server Remote Management Card web interface to remotely
manage the server in which you have installed the HP Server Remote
Management Card. The following management features are available for setting
up and configuring remote control of the HP Server.
NOTE
Up to three users can be logged on to the HP Server Remote
Management Card at a time. To log off, using your web
browser, shift to another URL. By default, you are
automatically logged off after five minutes of card or interface
inactivity.
For detailed information about each tab, click the online help button in the upper
right corner.
•
Identity.
Description of key information about the HP Server Remote
Management Card and the connected server including computer name,
description, location, and IP Address.
36
