Installing the 1/4 turn hook-and-loop cabling strap clips
Procedure
1.
Route and secure your cables with the hook-and-loop cabling strap clips.
2.
Turn the hook-and-loop cabling strap clip at a slight angle to align the square nut with the square hole on
the rack.
3.
Insert the square nut into the square hole on the rack, and then turn it at a 45 degree angle to lock it into
place.
4.
Bundle rack cables as required.
14
Installing the 1/4 turn hook-and-loop cabling strap clips
Summary of Contents for P9K37A
Page 4: ...Warranty information 25 4 Contents ...
Page 15: ...Installing components 15 ...