Configuration factors
Rack configuration software
To help you plan your rack configuration more efficiently, Hewlett Packard Enterprise provides eCo-Enterprise
Configurator, a powerful web-based service that enables you to build, store, and export end-to-end rack
configurations. Hewlett Packard Enterprise strongly recommends that you configure the rack using the eCo-
Enterprise Configurator, which provides factory default racking. The latest version of the software is available
on the
Hewlett Packard Enterprise website
.
HPE eCo-Enterprise Configurator
The eCo-Enterprise Configurator provides factory default racking for Hewlett Packard Enterprise hardware.
This approach is aligned with the strategic direction to meet the needs and expectations of valued customers.
If you require a custom rack configuration, contact the Hewlett Packard Enterprise Customer Business Center
or an authorized partner for assistance.
If you require factory default racking for the Hewlett Packard Enterprise hardware portfolio, you can use the
HPE eCo-Enterprise Configurator, which is available on the
Hewlett Packard Enterprise website
.
Optimum environment
Specific requirements for space, power, temperature, and airflow must be met to provide optimum
performance with minimum maintenance for your rack environment.
For additional information, refer to the Best Practices document on the
Hewlett Packard Enterprise website
.
Space requirements
When deciding where to place your rack:
• At least 1219 mm (48 in) of clearance is needed all the way around the pallet and above the rack to enable
the removal of the packing material.
• At least 1219 mm (48 in) of clearance is needed in front of the rack to enable the door to open completely.
• At least 762 mm (30 in) of clearance is needed in the rear of the rack to provide access to components.
• At least 380 mm (15 in) of clearance is needed around a power supply to facilitate servicing.
Power requirements
When planning for power distribution requirements for your rack configuration:
• The power load must be balanced between available AC supply branch circuits.
• The overall system AC current load must not exceed 80% of the branch circuit AC current rating.
• If a UPS is used, the load should not exceed 80% of the marked electrical current rating for the UPS.
This equipment must be installed in accordance with local and regional electrical regulations governing the
installation of information technology equipment by licensed electricians. This equipment is designed to
operate in installations covered by the Nation Electric Code (ANSI/NFPA-70, 1993) and the code for
protection of Electronic Computer/Data Processing Equipment (NFPA-75, 1992).
For electrical power ratings on options, refer to the products rating label or user documentation supplied with
that option.
Temperature requirements
To ensure continued safe and reliable equipment operation, install or position the rack in a well-ventilated,
climate-controlled environment.
Configuration factors
5
Summary of Contents for P9K37A
Page 4: ...Warranty information 25 4 Contents ...
Page 15: ...Installing components 15 ...
