Docking board
Description
Spare part number
Docking board
740206-001
Before removing the docking board, follow these steps:
1.
Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base
are off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.
Disconnect the power from the tablet and keyboard base by unplugging the power cord from the
tablet and keyboard base.
3.
Disconnect the tablet from the keyboard base.
4.
Remove the bottom cover (see
Bottom cover on page 61
).
5.
Remove the keyboard base battery (see
Keyboard base battery on page 62
).
Remove the docking board:
1.
Disconnect the following cables from the docking board:
(1)
and
(4)
Hinge assembly cables
(2)
TouchPad cable
(3)
Keyboard cable
(5)
Power connector cable
2.
Remove the four Phillips PM1.85×2.75 screws
(1)
that secure the docking board to the
keyboard/top cover.
Keyboard base component replacement procedures
71
