Memory module
Description
Spare part number
4096-MB
517588-001
2048-MB
506772-001
1024-MB
506771-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 39
).
Remove the memory module:
1.
Position the computer upside down with the front toward you.
2.
Loosen the two Phillips PM2.5×6.0 captive screws
(1)
that secure the memory module
compartment cover to the computer.
3.
Lift the front edge of the cover, swing it up and to the left
(2)
, and remove the cover
(3)
. The memory
module compartment cover is included in the Access doors, spare part number 517748-001.
4.
Spread the retaining tabs
(1)
on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Component replacement procedures
43
