Bluetooth module
NOTE:
The Bluetooth module spare part kits do not include a Bluetooth module cable. The Bluetooth
module cable is available in the Cable Kit, spare part number 517757-001.
Description
Spare part number
Bluetooth module
483113-001
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
Battery on page 39
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 40
)
b.
Memory module (see
Memory module on page 43
)
c.
WWAN module (see
WWAN module on page 45
)
d.
WLAN module (see
WLAN module on page 47
)
e.
Keyboard (see
Keyboard on page 50
)
f.
Top cover (see
Top cover on page 53
)
g.
Fan (see
Fan on page 55
)
Remove the Bluetooth module:
1.
Remove the Phillips PM2.0×3.0 screw
(1)
that secures the Bluetooth module to the base enclosure.
2.
Disconnect the Bluetooth module cable
(2)
from the system board.
Component replacement procedures
57
