3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Remove the hard drive:
1
.
Position the computer with the front toward you.
2
.
Loosen the two Phillips PM2.0×5.0 captive screws
(1)
that secure the hard drive cover to the
computer.
3
.
Lift the left side of the hard drive cover
(2)
, swing it to right, and remove the cover. The hard drive
cover is included in the Door/Cover Kit, spare part number 417073-001.
4
.
Remove the two black Phillips PM2.5×5.0 screws
(1)
that secure the hard drive to the computer.
5
.
Use the Mylar tab
(2)
to lift the hard drive
(3)
until it disconnects from the computer.
6
.
Remove the hard drive from the hard drive bay.
7
.
If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×4.0 screws
(1)
that secure the hard drive bracket to the hard drive.
Component replacement procedures 53
Summary of Contents for PAVILION DV2500
Page 1: ...HP Pavilion dv2500 Notebook PC Maintenance and Service Guide ...
Page 4: ...iv Safety warning notice ...
Page 172: ......
