RTC battery
Description
Spare part number
RTC battery
(includes cable and double-sided tape)
637193-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 40
).
5.
Remove the service door (see
Service door on page 41
).
6.
Remove the optical drive (see
Optical drive on page 42
).
7.
Remove the hard drive (see
Hard drive on page 44
).
8.
Remove the keyboard (see
Keyboard on page 51
).
9.
Remove the top cover (see
Top cover on page 56
).
10.
Remove the system board (see
System board on page 74
).
Remove the RTC battery:
1.
Turn the system board upside down, with the front toward you.
2.
Disconnect the RTC battery cable
(1)
from the system board.
ENWW
Component replacement procedures
77
Summary of Contents for Pavilion g6-2200
