background image

NOTE:

Before you back up your information, be sure you have designated a location to save the

backup files.

1.

Click the 

System menu

 icon at the far right of the top panel, and then click 

System Settings

>

 

Backup

 icon.

2.

Select 

Folders

 from the panel on the left side of the window, and beneath 

Folders to back up

,

select the folders to back up.

3.

Select 

Storage

 from the panel on the left side of the window, click the down-arrow next to

Backup Location

, and select 

Ubuntu One

 from the drop-down list.

4.

Select 

Overview

 from the panel on the left side of the window, and then click 

Back Up Now

.

NOTE:

The first time you back up your files to Ubuntu One, you will need to create an account

to sign into Ubuntu One. Enter your email address and password into the account sign-in boxes

and follow the on-screen instructions to complete the sign-in process.

To restore backup files:

1.

Click the 

System menu

 icon at the far right of the top panel, and then click 

System Settings

>

 

Backup

 icon.

2.

Click 

Restore

, select the location of the backup files and the folder name, and then click

Forward

.

3.

Under 

Restore from When?

, select the date of the files to be restored, and then click

Forward

.

4.

Select the location and folder where the files are to be restored, and then click 

Forward

.

5.

Follow the instructions on the screen.

6.

Click 

Restore

 to start restoring the files, or click 

Cancel

 to cancel the operation.

NOTE:

You may also back up to cloud storage services provided by various companies. For a small

fee, they will keep your backup for you. A cloud service is recommended, since it is an easy way to

keep your backups off-site and safe.

110

Chapter 9   Backing up, restoring, and recovering (Ubuntu Linux)

ENWW

Summary of Contents for PAVILION G6































































































































Reviews: