WLAN module
Description
Spare part number
Atheros HB125
802.11b/g/n 1×1 WiFi Adapter (select models only)
675794-001
Intel Centrino Wireless-N 2230
802.11b/g/n 2×2 WiFi and Bluetooth Combo Adapter
670290-001
Ralink RT3290LE
802.11 b/g/n 1x1 WiFi and Bluetooth 4.0 Combo Adapter (select models
only)
690020-001
Ralink RT5390R
802.11 b/g/n 1×1 WiFi Adapter
691415-001
CAUTION:
To prevent an unresponsive system, replace the wireless module only with a wireless
module authorized for use in the computer by the governmental agency that regulates wireless devices
in your country or region. If you replace the module and then receive a warning message, remove
the module to restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 41
).
5.
Remove the service door (see
Service door on page 42
).
Remove the WLAN module:
1.
Disconnect the WLAN antenna cables
(1)
from the terminals on the WLAN module.
NOTE:
The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal.
The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux terminal.
2.
Remove the PM 2.0×4.0 screw
(2)
that secures the WLAN module to the system board. (The
WLAN module tilts up.)
50
Chapter 4 Removal and replacement procedures
ENWW
