PCH heat sink
Description
Spare part number
PCH heat sink
683843-001
Before removing the PCH heat sink, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 41
).
5.
Remove the service door (see
Service door on page 42
).
6.
Remove the optical drive (see
Optical drive on page 43
).
7.
Remove the hard drive (see
Hard drive on page 45
)
8.
Remove the keyboard (see
Keyboard on page 52
).
9.
Remove the top cover (see
Top cover on page 57
).
10.
Remove the system board (see
System board on page 75
).
Remove the PCH heat sink:
1.
Remove the two PM 2.0 x 3.0 screws
(1)
that secure the PCH heat sink to the system board.
ENWW
Component replacement procedures
83
